Kawasaki Ninja Service Manual: KIBS System Circuit

Kawasaki Ninja Service Manual / Brakes / KIBS (Equipped Models) / Parts Location / KIBS System Circuit

KIBS System Circuit


1. Ignition Switch

2. Front Wheel Rotation Sensor

3. Front Brake Light Switch

4. Joint Connector C

5. Joint Connector D

6. ECU

7. Rear Wheel Rotation Sensor

8. Rear Brake Light Switch

9. Battery 12 V 8.6 Ah

10. Main Fuse 30 A

11. KIBS Motor Relay Fuse 30 A

12. KIBS Solenoid Valve Relay Fuse 20 A

13. Fuse Box 3

14. Frame Grounds

15. KIBS Kawasaki Self-diagnosis System Connector

16. KIBS Hydraulic Unit

17. Ignition Fuse 15 A

18. Brake Light/Horn Fuse 10 A

19. Fuse Box 1

20. KIBS Indicator Light (LED) with KIBS Symbol

21. ABS Indicator Light (LED)

22. Joint Connector F

Color Codes:

BK: Black

BL: Blue

BR: Brown

CH: Chocolate

DG: Dark Green

G: Green

GY: Gray

LB: Light Blue

LG: Light Green

O: Orange

P: Pink

PU: Purple

R: Red

V: Violet

W: White

Y: Yellow

Parts Location
NOTE The front and rear wheel rotation sensors and rotors are standard parts of this motorcycle. Front Wheel Rotation Sensor [A] Front Wheel Rotation Sensor Rotor [B] Rear Wheel Rotation Sens ...

KIBS Hydraulic Unit Terminal Names
1. Ground: BK 2. CAN Communication Line (High): GY/BL 3. Front Wheel Rotation Sensor Signal Input: Y 4. Power Supply: BR/W 5. KIBS Kawasaki Self-Daignosis System Terminal: P 6. Front and Rear ...

Other materials:

Brake Lever Adjuster
There is an adjuster on the brake lever. The adjuster has 6 positions so that the released lever position can be adjusted to suit the operator’s hands. Push the lever forward and turn the adjuster to align the number with the mark on the lever holder. The distance from the grip to the rel ...

Instrument display brightness control
The brightness of the tachometer LED segments and illumination of the multifunction meter are controlled automatically depending on the ambient brightness. A. Tachometer B. Ambient Brightness Sensor C. Multifunction Meter NOTE Be careful not to cover the ambient brightness sensor on th ...

Air Intake Duct Disassembly (Other than US, CA and CAL Models)
Remove: Air Intake Duct (see Air Intake Duct Removal) Seal [A] and Screen [B] Turn the air intake valve actuator [C] counterclockwise (90°). Remove the shaft [A] of the air intake valve actuator. Remove: Pad [A] Screws [B] Air Intake Valve [C] ...