All warning labels which are on your vehicle are repeated here. Read labels on your vehicle and understand them thoroughly. They contain information which is important for your safety and the safety of anyone else who may operate your vehicle. Therefore, it is very important that all warning labels be on your vehicle in the locations shown. If any label is missing, damaged, or worn, get a replacement from your Kawasaki dealer and install it in the correct position.
NOTE
1. Brake Fluid (Front)
2. Brake Fluid (Rear)
3. Important Drive Chain Information
4. Tire and Load Data
5. Battery Poison/Danger
6. Noise Emission Control Information
7. Weight and Manufacture
*8. Vacuum Hose Routing Diagram
9. Vehicle Emission Control Information
* : only on California model
*10. Fuel Level
11. Fuel Notice
* : only on California model
1)
2)
3)
4)
5)
6)
7)
8) only on California model
9) except California model
9)only on California model
10) only on California model
11)
Diode Circuit Inspection
Remove the relay box (see Relay Box Removal).
Check conductivity of the following pairs of terminals (see
Relay Box Internal Circuit in this section).
Diode Circuit Inspection
The resistance should be low in one direction and more
than 10 times as much in the other direction. If any dio ...
Valve Clearance
Valve and valve seat wear decreases
valve clearance, upsetting valve timing.
NOTICE
If valve clearance is left unadjusted,
wear will eventually
cause the valves to remain
partly open; which lowers performance,
burns the valves and
valve seats, and may cause serious
engine damage.
Valve cle ...
Rider’s Seat Installation
Insert the tabs on the front of the
rider’s seat into the slots in the frame
and secure the seat with mounting
bolts.
Install the seat cover and bolts.
A. Rider’s Seat
B. Tabs
C. Slots
D. Stays ...