Pull up the core by the flat-head screwdriver (–), and then remove the quick rivet.
While pulling down the rear part of the fairing, clear the front side hooks.
Valve Clearance
Valve and valve seat wear decreases
valve clearance, upsetting valve timing.
NOTICE
If valve clearance is left unadjusted,
wear will eventually
cause the valves to remain
partly open; which lowers performance,
burns the valves and
valve seats, and may cause serious
engine damage.
Valve cle ...
Engine Sprocket Installation
Replace the sprocket washer and axle cotter pin.
Install the engine sprocket onto the output shaft.
Apply molybdenum disulfide oil solution to the threads
and seating surface of the engine sprocket nut.
Tighten:
Torque - Engine Sprocket Nut: 145 N·m (14.8 kgf·m, 107
ft·lb)
NOTE
...
Brake Disc Installation
Install the brake disc on the wheel so that the marked side
[A] faces out.
Front Brake Discs [B]
Rear Brake Disc [C]
Apply a non-permanent locking agent to the threads of
the brake disc mounting bolts.
Tighten:
Torque - Brake Disc Mounting Bolts: 27 N·m (2.8 kgf·m, 20
...