Kawasaki Ninja Service Manual: Master Cylinder

Rear Brake Pad Installation

Check that the pad spring is in place on the caliper. Push the caliper piston in as far as it will go. Install the piston side pad [A] first, and then another pad. Fit the brake pad end into ...

Front Master Cylinder Removal

Remove the reservoir mounting bolt and nut [A]. Unscrew the banjo bolt [A] and disconnect the brake hose from the master cylinder (see Brake Hose and Pipe Replacement in the Periodic ...

Other materials:

Stem, Stem Bearing Removal
Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal in the Frame chapter) Front Fender (see Front Fender Removal in the Frame chapter) Front Wheel (see Front Wheel Removal in the Wheels/Tires chapter) Steering Stem Head with Handlebars (see Handlebar Removal) Fron ...

Warning Indicator Light (LED)
Light (LED) Inspection The warning indicator light (LED) [A] is used for the FI indicator, immobilizer indicator (immobilizer equipped models), water temperature warning indicator and oil pressure warning indicator. In this model, the warning indicator light (LED) (FI/immobilizer) goes ...

Battery Ground
Before completing any service on the motorcycle, disconnect the battery cables from the battery to prevent the engine from accidentally turning over. Disconnect the ground cable (–) first and then the positive (+). When completed with the service, first connect the positive (+) cable to the p ...