Kawasaki Ninja Service Manual: Muffler

Throttle Body Assy Holder Installation

Be sure to install the new O-rings [A]. Using a high flash-point solvent, clean off any oil or dirt that may be on the silicone sealant coating area. Dry them with a clean cloth. Apply sili ...

Muffler Body Removal

Remove: Bolts [A] Muffler Body Cover [B] Loosen the muffler body clamp bolt [A]. Remove the muffler body mounting bolt [B], and pull out the muffler body [C] backward from the pre ...

Other materials:

Fuel Consumption
This display mode shows the fuel consumption in Liter or Gallon by numerical value counted from the start of measuring to present time. A. Fuel Consumption B. “L” While the fuel consumption is displayed, push the lower button and hold it in until the fuel consumption values re ...

Fuels Containing Oxygenates
Gasoline frequently contains oxygenates (alcohols and ethers) especially in areas of the U.S. and Canada which are required to sell such reformulated fuels as part of a strategy to reduce exhaust emissions. The types and volume of fuel oxygenates approved for use in unleaded gasoline by th ...

Spring Tension Inspection
Since a spring becomes shorter as it weakens, check its free length [A] to determine its condition. If the spring of either fork leg is shorter than the service limit, it must be replaced. If the length of a replacement spring and that of the remaining spring vary greatly, the remaining s ...