Kawasaki Ninja Service Manual: Oil Filter Replacement

Kawasaki Ninja Service Manual / Periodic Maintenance / Periodic Maintenance Procedures / Replacement Parts / Oil Filter Replacement

Special Tool - Oil Filter Wrench: 57001-1249

Oil Filter Replacement


Special Tool - Oil Filter Wrench: 57001-1249

Torque - Oil Filter: 17 N·m (1.7 kgf·m, 13 ft·lb)

Oil Filter Replacement


NOTE

Hand tightening of the oil filter can not be allowed since it does not reach to this tightening torque.

Engine Oil Change
Situate the motorcycle so that it is vertical after warming up the engine. Remove the engine oil drain bolt [A] to drain the oil. The oil in the oil filter can be drained by removing the fil ...

Brake Hose and Pipe Replacement
NOTICE Brake fluid quickly ruins painted plastic surfaces; any spilled fluid should be completely washed away immediately. Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal ...

Other materials:

Exploded View
AL: Tighten the two clamp bolts alternately two times to ensure even tightening torque. HG: Apply high-temperature grease. R: Replacement Parts WL: Apply soap and water solution or rubber lubricant. Specifications WARNINGSome replacement tires may adversely affect h ...

Wheels
Tubeless tires are installed on the wheels of this motorcycle. The indications of “TUBELESS” on the tire side wall and the rim show that the tire and rim are specially designed for tubeless use. A. “TUBELESS” Mark A. “TUBELESS” Mark The tire and rim form a leakproof unit by ...

DFI System Wiring Diagram (KIBS Equipped Models)
1. Air Intake Solenoid Valve (Other than US, CA and CAL Models) 2. Engine Stop Switch 3. Starter Button 4. Air Switching Valve 5. Stick Coil #1, #2, #3, #4 6. Spark Plugs 7. Intake Air Temperature Sensor 8. Crankshaft Sensor 9. Secondary Fuel Injector #1 10. Secondary Fuel Injector #2 ...