Kawasaki Ninja Service Manual: Oil Pressure Switch

Kawasaki Ninja Service Manual / Engine Lubrication System / Oil Pressure Switch

Oil Pressure Measurement
Remove: Right Lower Fairing (see Lower Fairing Removal in the Frame chapter) Oil Passage Plug [A] Attach the adapter [A] and gauge [B] to the plug hole. Special Tools - Oil Pres ...

Oil Pressure Switch Removal
Remove: Right Lower Fairing (see Lower Fairing Removal in the Frame chapter) Engine Oil (Drain, see Engine Oil Change in the Periodic Maintenance chapter) Switch Cover [A] Switch Termin ...

Other materials:

Special Tools and Sealant
Hand Tester: 57001-1394 Flywheel Puller Assembly, M38 × 1.5/M35 × 1.5: 57001-1405 Peak Voltage Adapter: 57001-1415 Lead Wire - Peak Voltage Adapter: 57001-1449 Key Registration Unit: 57001-1582 Grip: 57001-1591 Flywheel & Pulley Holder: 57001-1605 Rotor Holder: ...

Ignition Switch Replacement
Remove: Air Cleaner Housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter) Disconnect the lead connectors [A]. Remove: Steering Stem Head (see Stem, Stem Bearing Removal in the Steering chapter) Using a small chisel or punch [A], turn out the Torx bolts. ...

Battery Ground
Before completing any service on the motorcycle, disconnect the battery cables from the battery to prevent the engine from accidentally turning over. Disconnect the ground cable (–) first and then the positive (+). When completed with the service, first connect the positive (+) cable to the p ...