Oil Pump
Oil Pump InstallationWheel Rotation Sensor Rotor Inspection
Remove:
Wheels (see Front/Rear Wheel Removal in the
Wheels/Tires chapter)
Brake Disc Mounting Bolts [A]
Sensor Rotor [B]
Front Wheel [C]
Rear Wheel [D]
Visually inspect the wheel rotation sensor rotor.
If the rotor is deformed or damaged (chipped teeth [A]),
replace the ...
KIBS Motor Relay Inspection (Service Code b 35)
Check the KIBS motor relay fuse (25 A) [A] (see Fuse
Inspection in the Electrical System chapter)
If the fuse is good, check the wiring continuity as follows.
Disconnect:
Battery Positive Cable (see Battery Removal in the Electrical
System chapter)
KIBS Hydraulic Unit Lead Connector (see ...
Intake Air Pressure Sensor #2 Installation
NOTE
The intake air pressure sensor #2 is the same part as
the intake air pressure sensor #1.
Installation is basically the reverse of removal.
Position the intake air pressure sensor #2 [A] between the
projections [B] on the rubber damper.
Install the rubber damper [A] on the brac ...