Kawasaki Ninja Owners Manual: Passenger’s Seat Installation

Kawasaki Ninja Owners Manual / General information / Seats / Passenger’s Seat Installation

Insert the tab on the rear of the passenger’s seat into the slot in the frame.
Insert the projections at the front of the passenger’s seat into the holes on the frame.
Push down the front part of the passenger’s seat until the lock clicks.

A. Passenger’s Seat

B. Projections

C. Holes

D. Tab

E. Slot

Pull up the front and rear ends of the passenger’s and rider’s seats to make sure they are securely locked.

Rider’s Seat Installation

Insert the tabs on the front of the rider’s seat into the slots in the frame and secure the seat with mounting bolts. Install the seat cover and bolts. A. Rider’s Seat B. Tabs ...

Tool Kit

The tool kit is located under the passenger’s seat. The kit contains tools that are helpful in making roadside repairs, adjustments, and some maintenance procedures explained in this manual. ...

Other materials:

Meter Unit Circuit (ZX1000K Model)
1. Ignition Switch 2. Joint Connector F 3. Stop Watch Button 4. Oil Pressure Switch 5. Crankshaft Sensor 6. Water Temperature Sensor 7. Gear Position Switch 8. Intake Air Temperature Sensor 9. ESD ECU (ZX1000JD/KD) 10. ECU 11. Rear Wheel Rotation Sensor 12. Frame Ground 1 13. Engine ...

Throttle Grip and Cables
Free Play Inspection Refer to the Throttle Control System Inspection in the Periodic Maintenance chapter. Free Play Adjustment Refer to the Throttle Control System Inspection in the Periodic Maintenance chapter. Cable Installation Install the throttle cables in accordance with the Cable, ...

Transmission Shaft Disassembly
Remove the transmission shafts (see Transmission Shaft Removal). Remove the circlips, and then disassemble the transmission shafts. Special Tool - Outside Circlip Pliers: 57001-144 The 5th gear [A] on the output shaft has three steel balls assembled into it for the positive neutral fin ...