Kawasaki Ninja Service Manual: Radiator and Radiator Fan Removal

Kawasaki Ninja Service Manual / Cooling System / Radiator / Radiator and Radiator Fan Removal

Radiator and Radiator Fan Removal


Radiator and Radiator Fan Removal


Radiator and Radiator Fan Removal


NOTICE

Do not touch the radiator core. This could damage the radiator fins, resulting in loss of cooling efficiency.

Radiator and Radiator Fan Removal


Radiator
...

Radiator and Radiator Fan Installation
If the radiator bracket [A] was removed, install it. Install the radiator fan to the radiator Tighten the radiator fan mounting bolts. When installing the pad [B], install it so that the upper ...

Other materials:

Water Pump Inspection
Remove the left lower fairing (see Lower Fairing Removal in the Frame chapter). Check the drainage outlet passage [A] at the bottom of the water pump body for coolant leaks. If the mechanical seal is damaged, the coolant leaks through the seal and drains through the passage. Replace th ...

Compression Damping Force Adjustment
There are two adjustments you can make to the compression damping force. High Speed Compression Damping Adjuster [A] Low Speed Compression Damping Adjuster [B] To adjust the high speed compression damping force, turn the outside damping adjuster with a wrench to the desired position ...

Regulator/Rectifier Inspection
Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal in the Frame chapter) Right Inner Fairing (see Inner Fairing Removal in the Frame chapter) Bolts [A] Regulator/Rectifier [B] Set the hand tester to the × 1 kΩ range and make the measurements show ...