Kawasaki Ninja Service Manual: Radiator Fan Relay (Service Code 56)

Kawasaki Ninja Service Manual / Self-Diagnosis System / Radiator Fan Relay (Service Code 56)

Stick Coil Input Voltage Inspection
NOTE Be sure the battery is fully charged. Turn the ignition switch to OFF. Remove the ECU (see ECU Removal in the Fuel System (DFI) chapter). Do not disconnect the ECU connectors. Con ...

Radiator Fan Relay Removal/Installation
The radiator fan relay is built in the relay box [A]. Refer to the Relay Box Removal in the Electrical System chapter. ...

Other materials:

Crankshaft Installation
NOTE If the crankshaft is replaced with a new one, refer to the Connecting Rod Big End Bearing/Crankshaft Main Bearing Insert Selection in the Specifications. NOTICE If the crankshaft, bearing inserts, or crankcase halves are replaced with new ones, select the bearing inserts and check cleara ...

Special Tools and Sealant
Oil Pressure Gauge, 5 kgf/cm²: 57001-125 Hand Tester: 57001-1394 Needle Adapter Set: 57001-1457 Extension Tube: 57001-1578 Fuel Pressure Gauge Adapter: 57001-1593 Fuel Hose: 57001-1607 Measuring Adapter: 57001-1700 Liquid Gasket, TB1211: 56019-120 ...

Rear Turn Signal Light Bulb Replacement
Remove the upper seat cover (see Seat Cover Removal in the Frame chapter). Disconnect the tail/brake light connector [A]. Turn the socket [A] counterclockwise and remove the socket together with the bulb. Push and turn the turn signal light bulb [A] counterclockwise an ...