Kawasaki Ninja Service Manual: Rear Shock Absorber Installation

Kawasaki Ninja Service Manual / Suspension / Rear Shock Absorber / Rear Shock Absorber Installation

Replace the rear shock absorber nuts and tie-rod nuts with new ones.
Tighten: Torque - Rear Shock Absorber Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb) Tie-Rod Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb)
When installing the rear shock absorber bracket [A], install it so that the recess side [B] faces downward and replace the rear shock absorber bracket nut [C] with a new one.
Tighten: Torque - Rear Shock Absorber Bracket Nut: 59 N·m (6.0 kgf·m, 44 ft·lb)

Rear Shock Absorber Installation

Rear Shock Absorber Removal

Remove: Lower Fairings (see Lower Fairing Removal in the Frame chapter) Fuel Tank (see Fuel Tank Removal in the Fuel System chapter) Bolts [A] (Both Sides) Foot Guard [B] (Both Sides) ...

Rear Shock Absorber Inspection

Remove the rear shock absorber (see Rear Shock Absorber Removal). Visually inspect the following items. Smooth Stroke Oil Leakage Crack or Dent If there is any damage to the rear ...

Other materials:

Steering Play Inspection
Remove the lower fairings (see Lower Fairing Removal in the Frame chapter). Raise the front wheel off the ground with the jack. Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 With the front wheel pointing straight ahead, alternately tap each end of the handlebar. The f ...

Brake Pedal Removal
Remove: Rear Master Cylinder Mounting Bolts [A] Foot Guard [B] Screw and Stopper [C] Bolt [D] Front Footpeg Bracket Bolts [E] Cable Guide [F] Remove: Cotter Pin [A] Joint Pin [B] Rear Brake Light Switch Spring [C] Return Spring [D] Remove the brake pedal mounting b ...

KIBS Servicing Precautions
There are a number of important precautions that should be followed servicing the KIBS. This KIBS is designed to be used with a 12 V sealed battery as its power source. Do not use any other battery except for a 12 V sealed battery as a power source. Do not reverse the battery cable connec ...