Kawasaki Ninja

Kawasaki Ninja Service Manual: Rear Sprocket Warp Inspection

Kawasaki Ninja Service Manual / Final Drive / Sprocket, Coupling / Rear Sprocket Warp Inspection

If the runout exceeds the service limit, replace the rear sprocket.

Rear Sprocket Warp Standard: TIR 0.4 mm (0.016 in.) or less

Service Limit: TIR 0.5 mm (0.020 in.)

Rear Sprocket Warp Inspection


Sprocket Wear Inspection
Visually inspect the engine and rear sprocket teeth for wear and damage. If the teeth are worn as illustrated, replace the sprocket, and inspect the drive chain wear (see Drive Chain Wear In ...

Brakes
...

Other materials:

Drive Chain
The drive chain slack and lubrication must be checked each day before riding the motorcycle and must be maintained in accordance with the Periodic Maintenance Chart for safety and to prevent excessive wear. If the chain becomes badly worn or maladjusted - either too loose or too tight - the c ...

Power Mode Indicator
This indicator shows the selected Power Mode. For more detailed information about the power mode, see power mode section in the How to Ride the Motorcycle chapter. A. Power Mode Indicator NOTE When all power mode indicators go off, the battery voltage is insufficient. Have the machine ...

Wheels
Tubeless tires are installed on the wheels of this motorcycle. The indications of “TUBELESS” on the tire side wall and the rim show that the tire and rim are specially designed for tubeless use. A. “TUBELESS” Mark A. “TUBELESS” Mark The tire and rim form a leakproof unit by ...