Kawasaki Ninja Owners Manual: Rider’s Seat Removal

Passenger’s Seat Removal

Remove the passenger’s seat by inserting the ignition key into the seat lock, and turning it clockwise. A. Seat Lock B. Ignition Key C. Passenger’s seat D. Pull up NOTE When rem ...

Rider’s Seat Installation

Insert the tabs on the front of the rider’s seat into the slots in the frame and secure the seat with mounting bolts. Install the seat cover and bolts. A. Rider’s Seat B. Tabs ...

Other materials:

Check 3-4: Turn Signal Indicator Light (LED) Inspection
Connect the leads in the same circuit as Check 3-2. Connect the terminal [5] to the battery (+) terminal. Connect the terminal [6] to the battery (+) terminal. Check that the turn signal indicator light (LED) [A] goes on. If the indicator light does not go on, replace the meter ...

Front Fork Installation (Each Fork Leg)
Install the fork so that the top plug end [A] as shown in the figure. 11 mm (0.43 in.) [B] Steering Stem Head [C] Tighten: Torque - Front Fork Clamp Bolts (Lower): 23 N·m (2.3 kgf·m, 17 ft·lb) NOTE Tighten the two lower front fork clamp bolts alternately two times to ensur ...

Rocker Arm Removal
Squeeze the brake lever slowly and hold it with a band. Remove the front footpeg bracket bolts. Raise the rear wheel off the ground with the jack (see Rear Shock Absorber Removal). Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 Remove: Lower Rear Shock Absorber B ...