Compression Gauge, 20 kgf/cm²:
57001-221 
Valve Spring Compressor Assembly:
57001-241 
Valve Spring Compressor Adapter,
25:
57001-1019 
Valve Seat Cutter, 45° - 
27.5:
57001-1114 
Valve Seat Cutter, 45° -
32:
57001-1115 
Valve Seat Cutter, 32° - 
28:
57001-1119 
Valve Seat Cutter Holder Bar:
57001-1128 
Valve Seat Cutter, 32° -
33:
57001-1199 
Valve Seat Cutter, 60° - 
25:
57001-1328 
Valve Seat Cutter Holder, 
4.5:
57001-1330 
Valve Guide Arbor, 
4.5:
57001-1331 
Valve Guide Reamer, 
4.5:
57001-1333 
Valve Seat Cutter, 60° - 
33:
57001-1334 
Valve Guide Driver:
57001-1564 
Valve Spring Compressor Adapter,
24:
57001-1586 
Compression Gauge Adapter, M10 × 1.0:
57001-1601 
L-Shape Hose:
57001-1606
Washer:
57001-1612 
Liquid Gasket, TB1211F:
92104-0004 
Liquid Gasket, TB1216B:
92104-1064
Exhaust System Identification
Clean Air SystemDFI System
1. ECU
2. Battery
3. Vehicle-down Sensor
4. Exhaust Butterfly Valve Actuator
5. Vacuum Chamber (Other than US, CA and CAL Models)
6. Air Intake Valve Actuator (Other than US, CA and CAL Models)
7. Air Intake Valve (Other than US, CA and CAL Models)
8. Air Flow
9. Air Intake Solenoid Valve ...
Fuel Tank Cleaning
WARNINGGasoline and low flash-point solvents can
be
flammable and/or explosive and cause severe
burns. Clean the tank in a well-ventilated area, and
take care that there are no sparks or flame anywhere
near the working area. Do not use gasoline
or low flash-point solvents t ...
Oxygen Sensor Heater Resistance Inspection
Turn the ignition switch to OFF.
Remove the fuel tank (see Fuel Tank Removal in the Fuel
System (DFI) chapter).
Disconnect the oxygen sensor lead connector [A].
Connect a digital meter [A] to the terminals in the oxygen
sensor lead connector [B].
Measure the oxygen sensor heat ...