Kawasaki Ninja Service Manual: Special Tools and Sealant

Kawasaki Ninja Service Manual / Engine Lubrication System / Special Tools and Sealant

Oil Pressure Gauge, 10 kgf/cm²: 57001-164


Oil Pressure Gauge Adapter, PT3/8: 57001-1233


Outside Circlip Pliers: 57001-144


Liquid Gasket, TB1211: 56019-120


Engine Oil Flow Chart
1. Oil Screen 2. Oil Pump 3. Oil Pressure Relief Valve 4. Oil Filter 5. Oil Pipe 6. Oil Cooler 7. Balancer Oil Passage 8. Main Oil Passage 9. Crankshaft Oil Passage 10. Oil Pressure Switc ...

Engine Oil and Oil Filter
WARNINGVehicle operation with insufficient, deteriorated, or contaminated engine oil will cause accelerated wear and may result in engine seizure, accident, and injury. Check the o ...

Other materials:

Rear Turn Signal Light Bulb Replacement
Remove the upper seat cover (see Seat Cover Removal in the Frame chapter). Disconnect the tail/brake light connector [A]. Turn the socket [A] counterclockwise and remove the socket together with the bulb. Push and turn the turn signal light bulb [A] counterclockwise an ...

Backups
The ECU takes the following measures to prevent engine damage when the DFI, ignition, S-KTRC or immobilizer system parts have troubles. Note: (1): D-J Method: When the engine load is light like at idling or low speed, the ECU determines the injection quantity by calculating fr ...

Air Intake Duct Disassembly (Other than US, CA and CAL Models)
Remove: Air Intake Duct (see Air Intake Duct Removal) Seal [A] and Screen [B] Turn the air intake valve actuator [C] counterclockwise (90В°). Remove the shaft [A] of the air intake valve actuator. Remove: Pad [A] Screws [B] Air Intake Valve [C] ...