Special Tools - Hook Wrench T=3.2 R37: 57001-1539 Hook Wrench R=35: 57001-1580
Spring Length [C]
Spring Preload Setting
Standard: Spring length 162 mm (6.38 in.)
Usable Range: Spring length 157
170 mm (6.18
6.69 in.)
Special Tools - Hook Wrench T=3.2 R37: 57001-1539 Hook Wrench R=35: 57001-1580
If the spring action feels too soft or too stiff, adjust it.
Spring Adjustment
Rear Brake Pad Installation
Check that the pad spring is in place on the caliper.
Push the caliper piston in as far as it will go.
Install the piston side pad [A] first, and then another pad.
Fit the brake pad end into the recess [B] of the caliper
holder.
Install the pad pin and the plug.
Tighten:
Torque - ...
Tie-Rod and Rocker Arm Bearing Installation
Replace the needle bearings [A] and oil seals with new
ones.
Apply plenty of grease to the lips of the oil seals.
Install the needle bearings and oil seals position as shown
in the figure.
Screw the needle bearing driver into the driver holder.
Insert the needle bearing driver into th ...
Rear Frame Front Removal
Remove:
Rear Frame Rear (see Rear Frame Rear Removal)
Rear Fender Front (see Rear Fender Front Removal)
Rear Footpeg Bracket Bolts [A]
Rear Footpeg Bracket [B]
Rear Frame Front Bolts [C]
Left Rear Frame Front [D]
Remove:
Rear Footpeg Bracket Bolts [A]
Rear Footpeg Bracke ...