Kawasaki Ninja Service Manual: Sprocket, Coupling

Drive Chain Removal/Installation

NOTE Since the drive chain is installed through the swingarm, The chain can not be removed other than by cutting it. Prepare the new link pin, link plate, grease seals, and tools for rejoining t ...

Engine Sprocket Removal

Remove: Engine Sprocket Cover Bolts [A] Engine Sprocket Cover [B] Flatten out the bended washer [A]. Remove the engine sprocket nut [B] and washer. NOTE When loosening the engin ...

Other materials:

Commutator Cleaning and Inspection
Clean the metallic debris off the between commutator segments [A]. NOTE Do not use emery or sand paper on the commutator. Check the commutator for damage or abnormal wear. Replace the starter motor with a new one if there is any damage or wear. Visually inspect the commutato ...

Fuel Filter Cleaning
The fuel filter [A] is built into the fuel pump and can not be cleaned or checked. If the fuel filter is suspected of clogging or being damaged, replace it with the fuel pump as a set. Fuel Pump Circuit 1. Ignition Switch 2. Engine Stop Switch 3. Joint Connector E 4. ECU 5. Engine G ...

Rear Shock Absorber Scrapping
WARNINGPressurized nitrogen may explode when heated. The rear shock contains nitrogen gas. To avoid an explosion, do not incinerate the shock body without first releasing the nitrogen and removing the shraeder valve. Remove the rear shock absorber (see Rear Shock Ab ...