Kawasaki Ninja Service Manual: Stator Coil Removal

Alternator Cover Installation

Using a high flash-point solvent, clean off any oil or dirt that may be on the silicone sealant coating area. Dry them with a clean cloth. Apply silicone sealant to the alternator lead gromme ...

Stator Coil Installation

Apply a non-permanent locking agent to the threads of the stator coil bolts and tighten them. Torque - Stator Coil Bolts: 12 N·m (1.2 kgf·m, 106 in·lb) Using a high flash-point solvent, ...

Other materials:

Oil Pressure Measurement
Remove: Right Lower Fairing (see Lower Fairing Removal in the Frame chapter) Oil Passage Plug [A] Attach the adapter [A] and gauge [B] to the plug hole. Special Tools - Oil Pressure Gauge, 10 kgf/cm²: 57001-164 Oil Pressure Gauge Adapter, PT3/8: 57001 -1233 ...

Exploded View
EO: Apply engine oil. G: Apply grease. L: Apply a non-permanent locking agent. Lh: Left-hand Threads MO: Apply molybdenum disulfide oil solution. (mixture of the engine oil and molybdenum disulfide grease in a weight ratio 10:1) R: Replacement Parts S: Follow the specified t ...

Fuel Filter Cleaning
The fuel filter [A] is built into the fuel pump and can not be cleaned or checked. If the fuel filter is suspected of clogging or being damaged, replace it with the fuel pump as a set. Fuel Pump Circuit 1. Ignition Switch 2. Engine Stop Switch 3. Joint Connector E 4. ECU 5. Engine G ...