Kawasaki Ninja Service Manual: Steering

Tie-Rod Operation Inspection

Pump the rear seat down and up 4 or 5 times, and inspect the smooth stroke. If the tie-rod [A] do not smoothly stroke or noise is found, inspect the fasteners and tie-rod bearings (see Tie-R ...

Steering Play Inspection

Remove the lower fairings (see Lower Fairing Removal in the Frame chapter). Raise the front wheel off the ground with the jack. Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608 ...

Other materials:

Exploded View
5. Other than US, CA, and CAL Models 6. The big diameter side of the dampers faces upward. G: Apply grease. L: Apply a non-permanent locking agent. R: Replacement Parts S: Follow the specified tightening sequence. SS: Apply silicone sealant. 11. Immobilizer Ampli ...

Drive Chain Slack Adjustment
Remove the cotter pin [A], and loosen the rear axle nut [B]. Loosen the both chain adjuster locknuts [C]. If the chain is too loose, turn out the left and right chain adjusters [D] evenly. If the chain is too tight, turn in the left and right chain adjusters evenly, and kick the wheel f ...

Rear Wheel Removal
Raise the rear wheel off the ground with the stand [A]. Remove: Cotter Pin [A] Rear Axle Nut [B] Washer [C] Rear Axle [D] (from Right Side) Remove the rear wheel rotation sensor from the caliper bracket (see Rear Wheel Rotation Sensor Removal in the Brakes chapter). ...