Kawasaki Ninja Service Manual: Steering

Rocker Arm/Tie-Rod Bearing, Sleeve Inspection

NOTICE Do not remove the bearings for inspection. Removal may damage them. Visually inspect the rocker arm, or tie-rod sleeves [A] and needle bearings [B]. The rollers in a needle bearin ...

Exploded View

11. ZX1000JD/KD AD: Apply adhesive. AL: Tighten the two clamp bolts alternately two times to ensure even tightening torque. G: Apply grease. L: Apply a non-permanent locking agent. ...

Other materials:

Tire Air Pressure Inspection
Remove the air valve cap. Measure the tire air pressure with an air pressure gauge [A] when the tires are cold (that is, when the motorcycle has not been ridden more than a mile during the past 3 hours). Install the air valve cap. Adjust the tire air pressure according to the specifi ...

Air Intake Solenoid Valve (Service Code 2d, Equipped Models)
Air Intake Solenoid Valve Removal/Installation Refer to the Air Intake Solenoid Valve Removal/Installation in the Fuel System (DFI) chapter. Air Intake Solenoid Valve Inspection Refer to the Air Intake Solenoid Valve Unit Test in the Electrical System chapter. If the air intake ...

Air Cleaner Housing Removal
Remove the fuel tank (see Fuel Tank Removal). Disconnect the secondary fuel hose [A] from the delivery pipe of the nozzle assy [B] (see Fuel Hose Replacement in the Periodic Maintenance chapter). Disconnect the secondary fuel injector connectors [C]. Free the lead from the grooves [D]. ...