Kawasaki Ninja Service Manual: Steering Play Inspection

Kawasaki Ninja Service Manual / Periodic Maintenance / Periodic Maintenance Procedures / Steering / Steering Play Inspection

Special Tools - Jack: 57001-1238 Jack Attachment: 57001-1608

If the wheel binds or catches before the stop, the steering is too tight.

If you feel looseness, the steering is too loose.

Steering Play Inspection


NOTE

Steering
...

Steering Play Adjustment
Remove: Steering Stem Head with Handlebars (see Handlebar Removal in the Steering chapter). Bend the claws [A] of the claw washer [B] straighten. Remove: Steering Stem Locknut [C] Claw ...

Other materials:

Front Fork Assembly
Replace the following parts with new ones. Slide Bushing Guide Bushing Oil Seal Install the following parts to the inner tube [A]. Dust Seal [B] Retaining Ring [C] Apply grease to the oil seal lips. Install the oil seal [A] so that the stamp side faces lower side. Insta ...

Gear Position Switch Removal
Remove: Oil Pump (see Oil pump Removal in the Engine Lubrication System chapter) Engine Sprocket (see Engine Sprocket Removal in the Final Drive chapter) Fuel Tank (see Fuel Tank Removal in the Fuel System (DFI) chapter) Disconnect the connector [A]. Remove: Screws [A] ...

ECU Communication Error (Service Code 39)
ECU Communication Line Inspection When the data is not sent from the ECU to the meter unit for more than about 10 seconds, the service code 39 is displayed. The data is sent through the CAN communication line. The service code 39 is detected with the meter unit. When the user mode, this commun ...