Special Tool - Swingarm Pivot Nut Wrench: 57001-1597
Make the gap between the adjusting collar and swingarm.
Engine Sprocket Removal
Remove:
Engine Sprocket Cover Bolts [A]
Engine Sprocket Cover [B]
Flatten out the bended washer [A].
Remove the engine sprocket nut [B] and washer.
NOTE
When loosening the engine sprocket nut, hold the rear
brake on.
Raise the rear wheel off the ground with the stand. ...
Stick Coil Removal
Remove the air cleaner housing (see Air Cleaner Housing
Removal in the Fuel System (DFI) chapter).
Disconnect the stick coil connectors [A].
Pull out the stick coils [B] upward.
First, turn the stick coil by 90 degrees, and then pull it out
by twisting the coil head to the left and righ ...
Stick Coil Installation
Apply a thin coat of grease [A] to the stick coils for easy
installation.
Insert the stick coils so that the coil heads align with the
lines [B] on the cylinder head cover.
NOTICE
Do not tap the coil head while installing the coil.
After installation, be sure the stick coils are ...