Daily Checks
Check the following items each day before you ride. The time required is
minimal,
and habitual performance of these checks will help ensure you a safe, reliable
ride.
If any irregularities are found during these checks, refer to the Maintenance
and
Adjustment chapter or see your dealer fo ...
Rebound Damping Force Adjustment
To adjust the rebound damping force, turn the rebound
damping adjuster [A] to the desired position.
The standard adjuster setting is the 1 3/4 turns out from
the fully clockwise position.
Rebound Damping Force Adjustment
...
Valve Guide Installation
Apply engine oil to the valve guide outer surface before
installation.
Heat the area around the valve guide hole to about 120
150°C (248 302°F).
NOTICE
Do not heat the cylinder head with a torch. This will
warp the cylinder head. Soak the cylinder head and
heat the oil.
Usin ...