Kawasaki Ninja Service Manual: Throttle Body Assy Holder Removal

Kawasaki Ninja Service Manual / Engine Top End / Throttle Body Assy Holder / Throttle Body Assy Holder Removal

Throttle Body Assy Holder Removal


Throttle Body Assy Holder
...

Throttle Body Assy Holder Installation
Be sure to install the new O-rings [A]. Using a high flash-point solvent, clean off any oil or dirt that may be on the silicone sealant coating area. Dry them with a clean cloth. Apply sili ...

Other materials:

Air Switching Valve Installation
Install the air switching valve [A] with hose [B] as shown in the figure. Front [C] Left Side View [D] White Paint [E] Air Switching Valve Operation Test Refer to the Air Suction System Damage Inspection in the Periodic Maintenance chapter. Air Switching Valve Unit Test ...

Stop Watch
The stop watch can be used in closed course competition. The stop watch is operated as follows: Push the upper button to display the stop watch. To start the stop watch, push the “START/STOP” switch on the right handlebar switch to the left. A. “START/STOP” Switch ...

Intake Air Pressure Sensor #1 Installation
NOTE The intake air pressure sensor #1 is the same part as the intake air pressure sensor #2. Installation is basically the reverse of removal. Position the intake air pressure sensor #1 [A] between the projections [B] on the rubber damper. Install the rubber damper [A] on the bracket ...