Kawasaki Ninja Service Manual: Tie-Rod and Rocker Arm Bearing Removal

Rocker Arm Installation

Install the both rocker arms [A] so that their marks [B] face left side. Replace the tie-rod nut, rear shock absorber nut and rocker arm nut with new ones. Apply grease to the insid ...

Tie-Rod and Rocker Arm Bearing Installation

Replace the needle bearings [A] and oil seals with new ones. Apply plenty of grease to the lips of the oil seals. Install the needle bearings and oil seals position as shown in the figure. ...

Other materials:

Exploded View
10. US, CA, CAL and AU Models 11. ZX1000JD/KD G: Apply grease. L: Apply a non-permanent locking agent. R: Replacement Parts S: Follow the specified tightening sequence. 1. US, CA and CAL Models 2. ZX1000J Model 3. ZX1000K Model 4. AU Model 5. Face the large diameter side re ...

Shift Pedal Removal
Remove: Shift Lever Bolt [A] Front Footpeg Bracket Bolts [B] If the tie-rod [C] is to be removed from the shift pedal and the shift lever, loosen the tie-rod locknuts [D]. The front tie-rod locknut is left-hand thread. Remove: Shift Pedal Mounting Bolt [A] ...

Valve Removal
Remove the cylinder head (see Cylinder Head Removal). Remove the valve lifter and shim. Mark and record the valve lifter and shim locations so they can be installed in their original positions. Using the valve spring compressor assembly, remove the valve. Special Tools - Valve ...