Kawasaki Ninja

Kawasaki Ninja Service Manual: Tire Air Pressure Inspection

Kawasaki Ninja Service Manual / Periodic Maintenance / Periodic Maintenance Procedures / Wheels/Tires / Tire Air Pressure Inspection

Adjust the tire air pressure according to the specifications if necessary.

Tire Air Pressure Inspection


Air Pressure (when Cold) Front: Up to 180 kg (397 lb) load:250 kPa (2.50 kgf/cm², 36 psi)

Rear: Up to 180 kg (397 lb) load: 290 kPa (2.90 kgf/cm², 42 psi)

Wheels/Tires
...

Wheel/Tire Damage Inspection
Remove any imbedded stones [A] or other foreign particles [B] from tread. Visually inspect the tire for cracks and cuts, and replace the tire if necessary. Swelling or high spots indicate int ...

Other materials:

Front Wheel Rotation Sensor Wiring Inspection (Service Code b 43)
Disconnect the front wheel rotation sensor lead connector [A] (see Front Wheel Rotation Sensor Removal in the Brakes chapter). Disconnect the KIBS hydraulic unit lead connector (see KIBS Hydraulic Unit Removal in the Brakes chapter). Check the wiring continuity of the W lead and ...

Valve Guide Removal
Remove: Valve (see Valve Removal) Oil Seal Spring Seat Heat the area around the valve guide to 120 150°C (248 302°F), and hammer lightly on the valve guide arbor [A] to remove the guide from the top of the head. NOTICE Do not heat the cylinder head with a torch. This ...

Thermostat Removal
Remove: Fuel Tank (see Fuel Tank Removal in the Fuel System (DFI) chapter) Air Cleaner Housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter) Throttle Body Assy (see Throttle Body Assy Removal in the Fuel System (DFI) chapter) Throttle Body Assy Holder Clamp [A] ...