Kawasaki Ninja Service Manual: Upper Inner Fairing Removal

Upper Fairing Assembly Disassembly

Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal) Headlight (see Headlight Removal/Installation in the Electrical System chapter) City Light (LED) (see City Light (LED) ...

Upper Inner Fairing Installation

Installation is the reverse of removal. Note the following. Place the tab [A] under the cover as shown in the figure. Insert the projection [B] into the grommet [C]. ...

Other materials:

Intake Air Pressure Sensor #2 Input Voltage Inspection
NOTE Be sure the battery is fully charged. Turn the ignition switch to OFF. Remove the air cleaner housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter). Disconnect the intake air pressure sensor #2 connector and connect the measuring adapter [A] between these con ...

Spark Plug Condition Inspection
Remove the spark plugs (see Spark Plug Replacement in the Periodic Maintenance chapter). Visually inspect the spark plugs. If the spark plug center electrode [A] and/or side electrode [B] are corroded or damaged, or if the insulator [C] is cracked, replace the plug. If the spark plug is ...

Cylinder Head Cover Removal
Remove: Air Suction Valves (see Air Suction Valve Removal) Throttle Body Assy (see Throttle Body Assy Removal in the Fuel System (DFI) chapter) Stick Coils (see Stick Coil Removal in the Electrical System chapter) Remove the clamps [A]. Turn up the front side of the heat insulation ...