Kawasaki Ninja

Kawasaki Ninja Service Manual: Valve Removal

Kawasaki Ninja Service Manual / Engine Top End / Valves / Valve Removal

Mark and record the valve lifter and shim locations so they can be installed in their original positions.

Valve Removal


Special Tools - Valve Spring Compressor Assembly [A]: 57001-241

Valve Spring Compressor Adapter, 25 [B]: 57001-1019

Valve Spring Compressor Adapter, 24: 57001-1586

Valves
Valve Clearance Inspection Refer to the Valve Clearance Inspection in the Periodic Maintenance chapter. ...

Valve Installation
NOTICE Do not lap the valve to the valve seat, using the grinding compound. It will come off oxide film treated surface of the valve. Replace the oil seal with a new one. Apply a thin coat of ...

Other materials:

Dimmer Switch
High or low beam can be selected with the dimmer switch. When the headlight is on high beam ( ), the high beam indicator light goes on. High beam.......( ) Low beam.......( ) NOTE When the headlight is on high beam, both headlights go on. When the headlight is on low beam, only one headl ...

Radiator and Radiator Fan Removal
Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal in the Frame chapter) Coolant (Drain, see Coolant Change in the Periodic Maintenance chapter) Air Cleaner Housing (see Air Cleaner Housing Removal in the Fuel System (DFI) chapter) Coolant Reserve Tank (see Coolant R ...

Connecting Rod Big End Side Clearance Inspection
Measure connecting rod big end side clearance. Insert a thickness gauge [A] between the big end and either crank web to determine clearance. Connecting Rod Big End Side Clearance Standard: 0.13 0.38 mm (0.0051 0.0150 in.) Service Limit: 0.58 mm (0.023 in.) If the clearance exceeds ...