Shift Pedal Removal
Remove:
Shift Lever Bolt [A]
Front Footpeg Bracket Bolts [B]
If the tie-rod [C] is to be removed from the shift pedal and
the shift lever, loosen the tie-rod locknuts [D].
The front tie-rod locknut is left-hand thread.
Remove:
Shift Pedal Mounting Bolt [A]
...
Camshaft Installation
NOTE
The exhaust camshaft has a 1001 EX mark [A] and the
intake camshaft has a 3154 IN mark [B]. Be careful not
to mix up these shafts.
Install the camshaft sprockets as shown in the figure.
#4 Cam Positions [A]
Intake Camshaft Sprocket [B]
Exhaust Camshaft Sprocket [C]
The int ...
Brake Disc Installation
Install the brake disc on the wheel so that the marked side
[A] faces out.
Front Brake Discs [B]
Rear Brake Disc [C]
Apply a non-permanent locking agent to the threads of
the brake disc mounting bolts.
Tighten:
Torque - Brake Disc Mounting Bolts: 27 N·m (2.8 kgf·m, 20
...