Kawasaki Ninja Service Manual: Water Temperature Sensor (Service Code 14)

Intake Air Temperature Sensor Resistance Inspection

Remove the intake air temperature sensor (see Intake Air Temperature Sensor Removal). Suspend the sensor [A] in a container of machine oil so that the heat-sensitive portion is submerged. S ...

Water Temperature Sensor Removal/Installation

NOTICE Never drop the water temperature sensor especially on a hard surface. Such a shock to the sensor can damage it. Remove the throttle body assy (see Throttle Body Assy Removal in the ...

Other materials:

Compression Damping Force Adjuster and Rebound Damping Force Adjuster Adjustment
The compression damping force adjuster and the rebound damping force adjuster are located on top of each front fork leg. Turn the adjuster clockwise with a screwdriver to increase damping force. Turn the adjuster counterclockwise to decrease damping force. NOTICE Do not force to t ...

Front Forks/Rear Shock Absorber Operation Inspection
Pump the forks down and up [A] 4 or 5 times, and inspect the smooth stroke. If the forks do not smoothly or noise is found, inspect the fork oil level or fork clamps (see Front Fork Oil Change in the Suspension chapter). Pump the rear seat down and up [A] 4 or 5 times, and inspec ...

Transmission Assy Removal
Remove: Engine Sprocket (see Engine Sprocket Removal in the Final Drive chapter) Gear Position Switch (see Gear Position Switch Removal in the Electrical System chapter) Collar [A] O-ring [B] Remove: Clutch (see Clutch Removal in the Clutch chapter) Shift Shaft Assembly ...