Kawasaki Ninja Service Manual: Wheel Rotation Sensor Air Gap Inspection

Kawasaki Ninja Service Manual / Brakes / KIBS (Equipped Models) / Wheel Rotation Sensor Air Gap Inspection

Wheel Rotation Sensor Air Gap Standard:

Front 0.4 1.6 mm (0.02
0.06 in.)


Rear 0.4 1.6 mm (0.02
0.06 in.)


Wheel Rotation Sensor Air Gap Inspection


NOTE

The sensor air gap cannot be adjusted.

If the air gap is not within the specification, inspect the hub bearing (see Hub Bearing Inspection in the Wheels/Tires chapter), sensor installation condition and sensor (see Wheel Rotation Sensor Inspection).

Wheel Rotation Sensor Air Gap Inspection


Wheel Rotation Sensor Inspection
Remove the front wheel rotation sensor [A] from the front fork. Remove the rear wheel rotation sensor [B] from the caliper bracket. Visually inspect the wheel rotation sensors. Replace t ...

Wheel Rotation Sensor Rotor Inspection
Remove: Wheels (see Front/Rear Wheel Removal in the Wheels/Tires chapter) Brake Disc Mounting Bolts [A] Sensor Rotor [B] Front Wheel [C] Rear Wheel [D] Visually inspect the wh ...

Other materials:

Washing Your Motorcycle
Rinse your bike with cold water from a garden hose to remove any loose dirt. Mix a mild neutral detergent (designed for motorcycles or automobiles) and water in a bucket. Use a soft cloth or sponge to wash your motorcycle. If needed, use a mild degreaser to remove any oil or greas ...

Exploded View
AL: Tighten the two clamp bolts alternately two times to ensure even tightening torque. G: Apply grease. R: Replacement Parts G: Apply grease. L: Apply a non-permanent locking agent. R: Replacement Parts Specifications ...

Front Master Cylinder Installation
Apply silicone grease to the sliding surface of the brake lever pivot bolt. Tighten: Torque - Brake Lever Pivot Bolt: 1.2 N·m (0.12 kgf·m, 11 in·lb) Brake Lever Pivot Bolt Nut: 5.9 N·m (0.60 kgf·m, 52 in·lb) Assemble the reservoir [A] and the bracket [B] as shown in the figu ...