Kawasaki Ninja Service Manual: Wheels/Tires

Clutch

Clutch Operation Inspection Pull the clutch lever just enough to take up the free play [A]. Measure the gap between the lever and the lever holder. If the gap is too wide, the clutch may no ...

Tire Air Pressure Inspection

Remove the air valve cap. Measure the tire air pressure with an air pressure gauge [A] when the tires are cold (that is, when the motorcycle has not been ridden more than a mile during the pa ...

Other materials:

Instrument display brightness control
The brightness of the tachometer LED segments and illumination of the multifunction meter are controlled automatically depending on the ambient brightness. A. Tachometer B. Ambient Brightness Sensor C. Multifunction Meter NOTE Be careful not to cover the ambient brightness sensor on th ...

Balance Weight Installation
Check if the weight portion has any play on the blade [A] and clip [B]. If it does, discard it. WARNINGUnbalanced wheels can create an unsafe riding condition. If the balance weight has any play on the rib of the rim, the blade and/or clip have been stretched. Replace th ...

Valve Installation
NOTICE Do not lap the valve to the valve seat, using the grinding compound. It will come off oxide film treated surface of the valve. Replace the oil seal with a new one. Apply a thin coat of molybdenum disulfide grease to the valve stem before valve installation. Install the springs so ...