Kawasaki Ninja Service Manual: Crankshaft Sensor Removal/Installation

Crankshaft Sensor (Service Code 21)

The crankshaft sensor has no power source, and when the engine stops, the crankshaft sensor generates no signals. ...

Crankshaft Sensor Peak Voltage Inspection

Refer to the Crankshaft Sensor Peak Voltage Inspection in the Electrical System chapter. If the reading is within the standard, remove the ECU and check the wiring for continuity between harn ...

Other materials:

Windshield
Windshield Removal Remove: Bolts [A] and Washers Windshield [B] Windshield Installation Be sure to install the wellnuts [A] and the washers. Tighten: Torque - Windshield Mounting Bolts: 1.2 N·m (0.12 kgf·m, 11 in·lb) ...

Fuel Pump Installation
Remove dirt or dust from the fuel pump [A] by lightly applying compressed air. Replace the fuel pump gasket with a new one. Check that the fuel pump terminal [A] and band [B] are in place. Apply a non-permanent locking agent to the threads of the fuel pump bolts. Tighten the ...

Swingarm Removal
Remove: Rear Wheel (see Rear Wheel Removal in the Wheels/Tires chapter) Mud Guard with Rear Brake Hose (see Mud Guard Removal in the Frame chapter) Rocker Arm (see Rocker Arm Removal) Remove: Brake Hose Clamp Bolt [A] Unscrew the swingarm pivot shaft nut [A]. Usi ...