If the spring of either fork leg is shorter than the service limit, it must be replaced. If the length of a replacement spring and that of the remaining spring vary greatly, the remaining spring should also be replaced in order to keep the fork legs balanced for motorcycle stability.
Spring Free Length Standard: 238 mm (9.37 in.) Service Limit: 233 mm (9.17 in.)
Dust Seal InspectionSpring Plate Free Play Adjustment
NOTE
The free play adjustment is performed by replacing the
steel plate(s).
Measure the clutch spring plate free play (see Clutch
Spring Plate Free Play Measurement), and then replace
the steel plate(s) which brings the free play within the
usable range.
Spring Plate Free Play
Usable ...
Rear Sprocket Removal
Remove the rear wheel (see Rear Wheel Removal in the
Wheels/Tires chapter).
NOTICE
Do not lay the wheel on the ground with the disc
facing down. This can damage or warp the disc.
Place blocks under the wheel so that the disc does
not touch the ground.
Remove:
Rear Sprocket Nu ...
Balancer Removal
Remove:
Engine (see Engine Removal in the Engine Removal/Installation
chapter)
Oil Pan (see Oil Pan Removal in the Engine Lubrication
System chapter)
Remove:
Balancer Shaft Clamp Lever Bolt [A]
Balancer Shaft Clamp Bolt [B]
Balancer Shaft Clamp Lever [C]
Balancer Shaft [D]
Bal ...
