This red warning indicator light and
the oil pressure warning symbol ( )
should go on whenever the ignition
switch is turned to “ON” and go off after
starting the engine.
A. Warning Indicator Light (Red)
B. Warning Symbols
This red warning indicator light has
the two warning functions: oil pressure
warning and fuel injection system
warning. This red warning indicator
light goes on with each warning symbols:
engine oil pressure warning symbol
( ) and
fuel injection warning
symbol (
).
If the red warning indicator light goes on with the engine running, have its cause checked by an authorized Kawasaki dealer.
Refer to the “Warning Symbols” in this section for more detailed information.
Rocker Arm Removal
Squeeze the brake lever slowly and hold it with a band.
Remove the front footpeg bracket bolts.
Raise the rear wheel off the ground with the jack (see
Rear Shock Absorber Removal).
Special Tools - Jack: 57001-1238
Jack Attachment: 57001-1608
Remove:
Lower Rear Shock Absorber B ...
Wheel Rotation Sensor Rotor Inspection
Remove:
Wheels (see Front/Rear Wheel Removal in the
Wheels/Tires chapter)
Brake Disc Mounting Bolts [A]
Sensor Rotor [B]
Front Wheel [C]
Rear Wheel [D]
Visually inspect the wheel rotation sensor rotor.
If the rotor is deformed or damaged (chipped teeth [A]),
replace the ...
Special Tools
Fork Oil Level Gauge:
57001-1290
Vacuum Gauge:
57001-1369
Hand Tester:
57001-1394
Throttle Sensor Setting Adapter #1:
57001-1400
Peak Voltage Adapter:
57001-1415
Needle Adapter Set:
57001-1457
Throttle Sensor Setting Adapter:
57001-1538
Measuring Adapter:
57001-1700
...