Kawasaki Ninja Service Manual: Camshaft Removal

Kawasaki Ninja Service Manual / Engine Top End / Camshaft, Camshaft Chain / Camshaft Removal

Camshaft Removal


Camshaft Removal


NOTICE

The crankshaft may be turned while the camshafts are removed. Always pull the chain taut while turning the crankshaft. This avoids kinking the chain on the lower (crankshaft) sprocket. A kinked chain could damage both the chain and the sprocket.

Camshaft Removal


Camshaft, Camshaft Chain
...

Camshaft Installation
NOTE The exhaust camshaft has a 1001 EX mark [A] and the intake camshaft has a 3154 IN mark [B]. Be careful not to mix up these shafts. Install the camshaft sprockets as shown in the figure ...

Other materials:

Front Wheel Rotation Sensor Signal Abnormal (Service Code b 42)
Measure the air gap between the front wheel rotation sensor and sensor rotor. Thickness Gauge [A] Air Gap Standard: 0.4 1.6 mm (0.02 0.06 in.) If the measurement is not the standard, check each part for deformation and looseness and correct accordingly. If the measurement is t ...

Brake Pedal Position Adjustment
NOTE Usually it is not necessary to adjust the pedal position, but always adjust it when push rod locknut has been loosened. Loosen the locknut [A] and turn the push rod with the hex head [B] to achieve the correct pedal position. If the length [C] shown is 69 ±1 mm (2.7 ±0.04 in.), th ...

Fuels Containing Oxygenates
Gasoline frequently contains oxygenates (alcohols and ethers) especially in areas of the U.S. and Canada which are required to sell such reformulated fuels as part of a strategy to reduce exhaust emissions. The types and volume of fuel oxygenates approved for use in unleaded gasoline by th ...