Kawasaki Ninja Owners Manual: Fluid Requirement

Kawasaki Ninja Owners Manual / Maintenance and adjustment / Brakes / Brake Fluid / Fluid Requirement

Use heavy-duty brake fluid only from a container marked DOT4.

NOTICE

Do not spill brake fluid onto any painted surface.

Do not use fluid from a container that has been left open or that has been unsealed for a long time.

Check for fluid leakage around the fittings.

Check brake hose for damage.

Brake Fluid

In accordance with the PeriodicMaintenance Chart, inspect the brake fluid level in both the front and rear brake fluid reservoirs and change the brake fluid. The brake fluid should also be change ...

Fluid Level Inspection

With the brake fluid reservoirs held horizontal, the brake fluid level must be kept between the upper and lower level lines. A. Front Brake Fluid Reservoir B. Upper Level Line C. Low ...

Other materials:

Timing Rotor Installation
Install the timing rotor [A] on the crankshaft [B] with their teeth [C] aligned. Holding the timing rotor with the flywheel & pulley holder and tighten the bolt. Torque - Timing Rotor Bolt: 39 N·m (4.0 kgf·m, 29 ft·lb) Special Tool - Flywheel & Pulley Holder: 57001-1605 I ...

Exhaust Butterfly Valve Cable Removal
Remove the fuel tank (see Fuel Tank Removal in the Fuel System (DFI) chapter). Open the clamp [A] and free the cables. Slide the dust covers [B]. Loosen the locknuts [A], and turn the adjusters [B] to give the cable plenty of play. Remove the clamp [A]. Remove the up ...

Throttle Body Assy Holder Installation
Be sure to install the new O-rings [A]. Using a high flash-point solvent, clean off any oil or dirt that may be on the silicone sealant coating area. Dry them with a clean cloth. Apply silicone sealant to any two positions of the new O -ring. Sealant - Liquid Gasket, TB1211F: 92104-0 ...