Kawasaki Ninja Service Manual: KIBS Solenoid Valve Relay Inspection (Service Code b 19)

Kawasaki Ninja Service Manual / Self-Diagnosis System / KIBS Service Codes (KIBS Equipped Models) / KIBS Solenoid Valve Relay Inspection (Service Code b 19)

The KIBS solenoid valve relay is built in the KIBS Hydraulic Unit. Therefore the relay cannot be checked directly.

If this service code appears even if all checks are ended, replace the KIBS hydraulic unit.

If the service code does not appear, the KIBS system normal (temporary failure).

Solenoid Valve Inspection (Service Code b 13, b 14, b 17, b 18)
The solenoid valve is built in the KIBS Hydraulic Unit [A]. Therefore the solenoid valve cannot be checked directly. Perform the Pre-Diagnosis Inspection 1 and 2 (see Inquiries to Rider in th ...

Front, Rear Wheel Rotation Difference Abnormal Inspection (Service Code b 25)
Check the following and correct the faulty part. Incorrect Tire Pressure Tires not recommended for the motorcycle were installed (incorrect tire size). Deformation of Wheel or Tire Mi ...

Other materials:

Precautions
1) No need of topping-up No topping-up is necessary in this battery until it ends its life under normal use. Forcibly prying off the seal cap to add water is very dangerous. Never do that. 2) Refreshing charge. Give refresh charge for 5 to 10 hours with charge current shown in the text (see ...

Front Caliper Removal
Remove: Bolt [A] Front Wheel Rotation Sensor [B] Loosen the banjo bolt [C] at the brake hose lower end, and tighten it loosely. Unscrew the caliper mounting bolts [D], and detach the caliper [E] from the disc. NOTICE Do not loosen the caliper assembly bolts [F]. Take out only ...

Drive Chain Wear Inspection
Remove the chain cover (see Drive Chain Removal/Installation in the Final Drive chapter). Rotate the rear wheel to inspect the drive chain for damaged rollers, and loose pins and links If there is any irregularity, replace the drive chain. Lubricate the drive chain if it appears dry. ...