Kawasaki Ninja Service Manual: Steering Damper Removal

Damping Force Adjustment ( ZX1000JC/KC)

To adjust the damping force, turn the damping adjuster [A] until you feel a click. The standard adjuster setting is the 18th click from the 1st of the fully clockwise position. If the damping ...

Steering Damper Installation

Install the following parts as shown in the figure. Collar [A] Washer (t = 3.5 mm, 0.14 in.) [B] Steering Damper [C] ( ZX1000JC/KC) Electronic Steering Damper [D] (ZX1000JD/KD) Washe ...

Other materials:

Throttle Control System
Check the throttle grip play each day before riding the motorcycle, and carry out maintenance and adjustments in accordance with the Periodic Maintenance Chart. Adjust it if necessary. Throttle Grip The throttle grip controls the butterfly valves in the throttle body. If the throttle grip ha ...

Coupling Bearing Removal
Remove: Coupling Grease Seal Circlip [A] Special Tool - Inside Circlip Pliers: 57001-143 Remove the bearing [A] by tapping from the wheel side. Special Tool - Bearing Driver Set [B]: 57001-1129 ...

Clutch
Clutch Operation Inspection Pull the clutch lever just enough to take up the free play [A]. Measure the gap between the lever and the lever holder. If the gap is too wide, the clutch may not release fully. If the gap is too narrow, the clutch may not engage fully. In either case, adjust ...