Kawasaki Ninja Owners Manual: Lubrication - Drive Chain

Lubrication is necessary after riding through rain or on wet roads, or any time that the chain appears dry.

Use a lubricant for sealed chains to prevent deterioration of chain seals. If the chain is especially dirty, clean it using a cleaner for sealed chains following the instructions supplied by the chain cleaner manufacturer.

Wear Inspection

Remove the left front footpeg bracket bolts. A. Front Footpeg Bracket B. Bolts Remove the bolts and chain cover. A. Bolts B. Chain Cover Stretch the chain taut either by u ...

Brakes

Brake Wear Inspection Inspect the brakes for wear. For each front and rear disc brake caliper, if the thickness of either pad is less than 1 mm (0.04 in.), replace both pads in the caliper as a s ...

Other materials:

Liquid Gasket, Non-permanent Locking Agent
For applications that require Liquid Gasket or a Non-permanent Locking Agent, clean the surfaces so that no oil residue remains before applying liquid gasket or non-permanent locking agent. Do not apply them excessively. Excessive application can clog oil passages and cause serious damage. ...

Immobilizer Amplifier Replacement
Remove the upper fairing assembly (see Upper Fairing Assembly Removal in the Frame chapter). Disconnect the connector [A]. Pull out the immobilizer amplifier [B] together with the rubber protector [C] from the air intake duct [D]. ECU Replacement Refer to the ECU Removal/Instal ...

Wheel Rotation Sensor Rotor Inspection
Remove: Wheels (see Front/Rear Wheel Removal in the Wheels/Tires chapter) Brake Disc Mounting Bolts [A] Sensor Rotor [B] Front Wheel [C] Rear Wheel [D] Visually inspect the wheel rotation sensor rotor. If the rotor is deformed or damaged (chipped teeth [A]), replace the ...