Kawasaki Ninja Service Manual: Stick Coils #1, #2, #3, #4: (Service Code 51, 52, 53, 54)

Fuel Pump Relay Inspection

Refer to the Relay Circuit Inspection in the Electrical System chapter. If the fuel pump relay is normal, check the wiring to the fuel pump relay (see Fuel Pump Relay Circuit). Special Tool ...

Stick Coil Removal/Installation

Refer to the Stick Coil Removal/Installation in the Electrical System chapter. Stick Coil Primary Winding Resistance Inspection Refer to the Stick Coil Inspection in the Electrical System c ...

Other materials:

Drive Chain
The drive chain slack and lubrication must be checked each day before riding the motorcycle and must be maintained in accordance with the Periodic Maintenance Chart for safety and to prevent excessive wear. If the chain becomes badly worn or maladjusted - either too loose or too tight - the c ...

Lubrication
Lubrication is necessary after riding through rain or on wet roads, or any time that the chain appears dry. Use a lubricant for sealed chains to prevent deterioration of chain seals. If the chain is especially dirty, clean it using a cleaner for sealed chains following the instructions suppli ...

ESD Actuator Resistance Inspection
Turn the ignition switch to OFF. Remove the electronic steering damper unit (see Steering Damper Removal in the Steering chapter). Connect a digitalmeter to the ESD actuator connector [A]. Measure the ESD actuator resistance. ESD Actuator Resistance Connections: BK lead [1] ← ...