Kawasaki Ninja Service Manual: Electrical System

Steering Damper Oil Leak Inspection

Visually inspect the steering damper [A] for oil leakage. If the oil leakage is found on it, replace the steering damper with a new one (see Steering Damper Removal/ Installation in the Steeri ...

Lights and Switches Operation Inspection

First Step Set the gear position in the neutral position. Turn the ignition switch to ON. The following lights should go on according to below table. If the following light does not go ...

Other materials:

Rear Shock Absorber Installation
Replace the rear shock absorber nuts and tie-rod nuts with new ones. Tighten: Torque - Rear Shock Absorber Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb) Tie-Rod Nuts: 34 N·m (3.5 kgf·m, 25 ft·lb) When installing the rear shock absorber bracket [A], install it so that the recess side [B] ...

Payload and Tire Pressure
Failure to maintain proper inflation pressures or observe payload limits for your tires may adversely affect handling and performance of yourmotorcycle and can result in loss of control. The maximum recommended load in addition to vehicle weight is 180 kg (397 lb), including rider, passenger, ...

Serial number locations
The engine and frame serial numbers are used to register the motorcycle. They are the only means of identifying your particular machine from others of the same model type. These serial numbers may be needed by your dealer when ordering parts. In the event of theft, the investigating authoriti ...