Kawasaki Ninja Service Manual: Fuel Injectors

Kawasaki Ninja Service Manual / Fuel System (DFI) / Fuel Injectors

Primary Fuel Injector Removal/Installation

Refer to the Throttle Body Assy Disassembly/Assembly.

Secondary Fuel Injector Removal/Installation

Refer to the Nozzle Assy Disassembly/Assembly.

Fuel Filter Cleaning
The fuel filter [A] is built into the fuel pump and can not be cleaned or checked. If the fuel filter is suspected of clogging or being damaged, replace it with the fuel pump as a set. Fuel Pu ...

Fuel Injector Audible Inspection
NOTE Be sure the battery is fully charged. The secondary fuel injectors are operating with following conditions. 1. The engine speed is more than 6 000 r/min (rpm). 2. The throttle openi ...

Other materials:

Service Code Erasing
When repair has been done, warning indicator light (LED) and warning symbol go off and service code are not displayed. But the service codes stored in memory of the ECU are not erased to preserve the problem history. In this model, the problem history can not be erased. However, the memorie ...

Compression Damping Force Adjuster and Rebound Damping Force Adjuster Adjustment
The compression damping force adjuster and the rebound damping force adjuster are located on top of each front fork leg. Turn the adjuster clockwise with a screwdriver to increase damping force. Turn the adjuster counterclockwise to decrease damping force. NOTICE Do not force to t ...

ECU Identification
Most countries have their own regulations, so each ECU has different characteristic. So, do not confuse ECU with each other and use only the ECU for your model. Otherwise, the motorcycle can not clear the regulation. ECU Identification ZX1000JB/KB ZX1000JC /KC ...