Kawasaki Ninja Service Manual: Starter Clutch

Torque Limiter Installation

Apply molybdenum disulfide grease to the torque limiter shaft [A]. Install the torque limiter [B], the collar [C] and the shaft. Turn the large-hole end of the shaft to inside as shown in t ...

Starter Clutch Removal

Remove: Torque Limiter (see Torque Limiter Removal) Transmission Assy (see Transmission Assy Removal) Starter Clutch Shaft Holder Bolt [A] Starter Clutch Shaft Bolt [B] Starter Clutch Sha ...

Other materials:

Muffler Body Installation
Replace the muffler body gasket [A] with a new one. Install the muffler body gasket to the premuffler chamber [B] until it is bottomed so that the chamfer side faces premuffler chamber. Install the muffler body clamp [C] as shown in the figure. Insert the projection [D] into the slot [ ...

Radiator Hose and O-ring Replacement
Drain the coolant (see Coolant Change). Remove: Upper Fairing Assembly (see Upper Fairing Assembly Removal in the Frame chapter) Thermostat Housing [A] (see Thermostat Removal in the Cooling System chapter) Oil Cooler [B] (see Oil Cooler Removal in the Engine Lubrication System chap ...

Overview
S-KTRC is a highly sophisticated system based on MotoGP racing technology. Unlike the KTRC system used on the GTR1400 ABS (Concours 14 ABS in N. America), which is designed to offer rider reassurance when traversing slippery surfaces, S-KTRC, is designed to maximize forward motion, allowing ...