Kawasaki Ninja Service Manual: Clean Air System

Special Tools and Sealant

Compression Gauge, 20 kgf/cm²: 57001-221 Valve Spring Compressor Assembly: 57001-241 Valve Spring Compressor Adapter, 25: 57001-1019 Valve Seat Cutter, 45° - 27.5: 57001-1114 Valve ...

Air Suction Valve Removal

Remove: Air Switching Valve (see Air Switching Valve Removal) Air Suction Valve Cover Bolts [A] (Both Sides) Air Suction Valve Covers [B] (Both Sides) Remove the air suction valves ...

Other materials:

Service Code Reading
The service code(s) is displayed on the LCD by the number of two digits. NOTE The service code of the KIBS and ABS adds “b” at the left side of the code. The service code of the ESD adds “E” at the left side of the code. When there are a number of problems, all the serv ...

Oil Seal, Grease Seal
Do not remove pressed oil or grease seals unless removal is necessary. Replace with new ones whenever removed. Press new oil seals with manufacture and size marks facing out. Make sure the seal is aligned properly when installing. Apply specified grease to the lip of seal before installing ...

Oil Pump Drive Gear Installation
Install is the reverse of removal. Note the following. First, engage the oil pump chain [A] to the gears, and then install the oil pump drive gear [B]. Turn the “OUT” mark [C] to outside. Apply a non-permanent locking agent to the oil pump drive chain guide bolt and the oil pump drive ...