Kawasaki Ninja Service Manual: Main Throttle Sensor (Service Code 11)

Backups

The ECU takes the following measures to prevent engine damage when the DFI, ignition, S-KTRC or immobilizer system parts have troubles. Note: (1): D-J Method: When the engine load ...

Main Throttle Sensor Removal/Adjustment

NOTICE Do not remove or adjust the main throttle sensor [A] since it has been adjusted and set with precision at the factory. Never drop the throttle body assy especially on a hard surface. Suc ...

Other materials:

Tire Repair
Currently two types of repair for tubeless tires have come into wide use. One type is called a temporary (external) repair which can be carried out without removing the tire from the rim, and the other type is called permanent (internal) repair which requires tire removal. It is generally unders ...

Fuel Pump Operating Voltage Inspection
NOTE Be sure the battery is fully charged. Turn the ignition switch to OFF. Remove: Fuel Tank Bolts (see Fuel Tank Removal) Fuel Tank Bracket Bolts (see Fuel Tank Removal) Disconnect the fuel pump lead connector and connect the harness adapter [A] between these connectors as shown i ...

Water Temperature Sensor Resistance Inspection
Refer to the Water Temperature Sensor Inspection in the Electrical System chapter. If the reading is within the standard, but the problem still exists, replace the ECU (see ECU Removal/Installation in the Fuel System (DFI) chapter). Water Temperature Sensor Circuit 1. ECU 2. Water T ...