Kawasaki Ninja Service Manual: Clutch

Exhaust Butterfly Valve Cable Installation

Confirm whether pulley [A] is an angle shown in the figure. 41.7° ±7° [B] This position is original position of the pulley. NOTE Correct the position electrically after confirming the u ...

Exploded View

CL: Apply cable lubricant. EO: Apply engine oil. G: Apply grease. HG: Apply high-temperature grease. L: Apply a non-permanent locking agent. M: Apply molybdenum disulfide grease ...

Other materials:

Coolant Temperature Meter
The coolant temperature gauge indicates temperature of the engine coolant. The “ ” symbol is displayed if the coolant temperature meter is selected. A. Coolant Temperature Meter B. Warning Indicator Light (Red) C. “ ” Symbol If the coolant temperature is below 40°C (104°F ...

Clutch Lever Installation
Install the clutch lever so that the mating surface [A] of the clutch lever clamp is aligned with the punch mark [B] of the handlebar. Tighten the upper clamp bolt first, and then the lower clamp bolt. Torque - Clutch Lever Clamp Bolts: 7.8 N·m (0.80 kgf·m, 69 in·lb) There will be ...

Front, Rear Wheel Rotation Difference Abnormal Inspection (Service Code b 25)
Check the following and correct the faulty part. Incorrect Tire Pressure Tires not recommended for the motorcycle were installed (incorrect tire size). Deformation of Wheel or Tire Missing Teeth or Clogging with Foreign Matter of Sensor Rotor (see Wheel Rotation Sensor Rotor Inspe ...